Cart 0
Apollo Power-4 VS Variable Speed HVLP Turbine Systems

Apollo Power-4 VS Variable Speed HVLP Turbine Systems

$ 999.00 $ 1,099.00

Apollo Power-4 VS HVLP Turbine Systems

Apollo Power-4 VS, featuring Apollo's new variable speed control, is perfect for spraying solvent-based materials such as: enamels, stains, lacquers, and polyurethanes, catalyzed finishes, conversion varnish and linear polyurethanes, as well as any waterborne coatings, latex (emulsion) paint (use with Floetrol® or similar flow additive) and other specialized materials like contact cement, faux paints and gelcoat. 


Apollo's New Power-4 brings you 12% more power from a 4-stage Turbine and that means you've got the power and performance to spray higher viscosity materials with excellent results.

This 4-Stage HVLP Turbine is an extremely versatile unit and is widely used by woodworkers, boat builders and restorers; for automotive and airplane restoration and finishing; and any industry desiring super fine atomization with the widest range of materials.

The Power-4 will support multiple spray gun operations.

This turbine comes equipped with the Handi-Hold™ Spray Gun Docking Station, Apollo's newest innovation. Store, hold or transport your spray gun in a vertical position with no risk of knocking or falling over. Ready to spray when you are.

This unit is equipped with an internal air relief valve to accommodate a non-bleed style turbine spray gun.

Specifications:
    • 4 Stage
    • 9.0 PSI (.062 bar)
    • 130 CFM
    • Hour use meter, lighter weight design, comfort carry handle and anti-vibration pads.
    • Dual Air Filtration
    • HVLP Only - Single Spray Gun
    • 110VAC - 60HZ
    • length: 15"
    • width: 8.5"
    • height: 12"
    • weight: 24 lbs.
Supplied with 24 foot flex air hose when ordered as a system with gun.
Choose from these Power-4 Systems in the Drop Down Box above:

Available Tip & Needle Sizes for 7700 Gun:
  • 0.5mm - Use for Automotive clear coats when doing spot repair only.
  • 0.8mm - Use with very thin materials such as stains and dyes. Also used for auto clears and base coats
  • 1.0mm - (default size) Use for fine touch up, heavier stains, thin lacquers, varnish, shellac
  • 1.3mm - Use for most common clear and base coat finishes
  • 1.5mm - Use for heavier bodied clear and base coat finishes, lighter primers and latex paint on cabinets
  • 1.8mm - Use for heavy bodied clear finishes, light oil based paint finishes and Latex paint on doors and walls.
  • 2.0mm - Use for light primers, oil based finishes and Exterior latex finishes
  • 2.5mm - Use for most latex coatings, heavy build primers and multi-color finishes and Gel-Coat
If you're ordering a system with the 7700 Atomizer gun and would like it supplied with a needle size other than 1.0mm, enter the size in a note with your order. You will receive your gun with the Tip/Needle size you select along with the appropriate Air Cap.

We guarantee you the BEST PRICE on this and every other product we sell! Click here to read our guarantee.


Share this Product


More from this collection