Cart 0
Apollo Power-3 HVLP Turbine system

Apollo Power-3 HVLP Turbine system

$ 699.00 $ 899.00

Apollo Power-3 HVLP Turbine Systems

Apollo's TrueHVLP New Power Series gives you more power, more performance and more value than ever before - Model POWER-3 provides 15% more power from a 3-Stage Turbine. 

Apollo Model POWER-3 provides excellent results when spraying all solvent-based materials such as enamels, lacquers, stains, polyurethanes, most HVLP compatible waterborne coatings and more.

This 3-Stage HVLP Turbine is an extremely versatile unit and is widely used by woodworkers, boat builders and restorers; for automotive and airplane restoration and finishing; and any industry desiring super fine atomization with the widest range of materials.

The POWER-3 will yield a high quality finish and suits smaller-scale professional and home-based operations.

This turbine comes equipped with the Handi-Hold™ Spray Gun Docking Station, Apollo's newest innovation. Store, hold or transport your spray gun in a vertical position with no risk of knocking or falling over. Ready to spray when you are.

This unit is equipped with an internal air relief valve to accommodate a non-bleed style turbine spray gun. 

  • 3 Stage
  • 7.0 PSI (0.48 Bar)
  • 115 CFM
  • Hour use meter, lighter weight design, comfort carry handle and anti-vibration pads.
  • Dual Air Filtration
  • HVLP Only - Single Spray Gun
  • 110VAC - 60HZ
  • weight: 23 lbs
  • length: 15"
  • width: 8.5"
  • height: 12"
Supplied with 24 foot (7.3 meter) flex air hose.
Choose from these POWER-3 Systems in the Drop Down Box above:

Available Tip & Needle Sizes for 7500 Gun:
    • 0.5mm - Use for Automotive clear coats when doing spot repair only.
    • 0.8mm - Use with very thin materials such as stains and dyes. Also used for auto clears and base coats
    • 1.0mm - (default size) Use for fine touch up, heavier stains, thin lacquers, varnish, shellac
    • 1.3mm - Use for most common clear and base coat finishes
    • 1.5mm - Use for heavier bodied clear and base coat finishes, lighter primers and latex paint on cabinets
    • 1.8mm - Use for heavy bodied clear finishes, light oil based paint finishes and Latex paint on doors and walls.
    • 2.0mm - Use for light primers, oil based finishes and Exterior latex finishes
    • 2.5mm - Use for most latex coatings, heavy build primers and multi-color finishes and Gel-Coat
If you're ordering a system with the 7500 Atomizer gun and would like it supplied with a size other than 1.0mm, enter the size in your note with the order. You will receive your gun with the Tip/Needle size you select along with the appropriate Air Cap.

We guarantee you the BEST PRICE on this and every other product we sell! Click here to read our guarantee.

Share this Product

More from this collection