Apollo Power-4 VS, featuring Apollo's new variable speed control, is perfect for spraying solvent-based materials such as: enamels, stains, lacquers, and polyurethanes, catalyzed finishes, conversion varnish and linear polyurethanes, as well as any waterborne coatings, latex (emulsion) paint (use with Floetrol® or similar flow additive) and other specialized materials like contact cement, faux paints and gelcoat. 

• 4 Stage
• 9.0 PSI (.062 bar)
• 130 CFM
• Hour use meter, lighter weight design, comfort carry handle and anti-vibration pads.
  
• Dual Air Filtration
• HVLP Only - Single Spray Gun
• 110VAC - 60HZ
• length: 15"
• width: 8.5"
• height: 12"
• weight: 24 lbs.

• Turbine only without Hose or Spray Gun

  ---

• Turbine with Apollo 5510 Quick-Release Cup Gun

  ---

• Turbine with Apollo 5520 Touch Up Gun

  ---

• Turbine with Apollo 7700 Atomizer Gun
  - Pressure Feed or Gravity Feed - You can select your Tip & Needle size

  ---

• 0.5mm - Use for Automotive clear coats when doing spot repair only.
• 0.8mm - Use with very thin materials such as stains and dyes. Also used for auto clears and base coats
• 1.0mm - (default size) Use for fine touch up, heavier stains, thin lacquers, varnish, shellac
• 1.3mm - Use for most common clear and base coat finishes
• 1.5mm - Use for heavier bodied clear and base coat finishes, lighter primers and latex paint on cabinets
• 1.8mm - Use for heavy bodied clear finishes, light oil based paint finishes and Latex paint on doors and walls.
• 2.0mm - Use for light primers, oil based finishes and Exterior latex finishes
• 2.5mm - Use for most latex coatings, heavy build primers and multi-color finishes and Gel-Coat